Oil Lines and Parts

Electronic / Vacuum Actuator for 2.0 16v TDI PPD170 BMN Engines Direct replacement Actuator for the PPD170 BMN Turbochargers fitted to the VW Golf Mk5, Audi A3 and Skoda Octavia, Seat Leon as well as others Not to be confused with cheaper chinese...

Garrett GTB VZK Oil Return Plate Kit for 3.0TDi Turbo This kit is to be used when retro-fitting a Non-Watercooler Garrett VZK Turbo to a VAG TDi Engine The Flange is CNC Machined from Billet...

GTB1756VK Steel Turbine Housing Gasket This steel gaskets seals the Tubine Housing (Hot Side) to the CHRA (Centre Housing Rotating Assembly) Ideal for turbocharger rebuild Compatible with the following turbocharger part numbers: VW...

M5 x 15mm Repair Washer M5 repair washer with an outer diameter of 15mm

Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Oval Port) Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Oval Port) Found on the KKK Turbochargers fitted to the later Common Rail Engines such as the VW Golf Mk6, Audi A3 and Skoda...

Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Round Port) Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Round Port) Melett VW 2.0 TDi Common Rail Electronic / Vacuum Actuator (Round Port) Found on the KKK Turbochargers fitted to the...

Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines with Garrett Turbocharger Found on the Garrett Turbochargers fitted to the later Common Rail Engines such as the VW Golf Mk6, Audi A3 and Skoda Octavia as well as others The turbo actuators can...

OE VAG M8 10mm Copper Exhaust Nut Special VW Size Exhaust Nuts M8 Thread with 10mm 6 Point head used on the Exhaust Manifold Studs and Downpipe Studs

M10x1.5 to M8x1.25 Repair Exhaust Studs These studs are ideal for replacing damaged / stripped M8x1.25 threads. Simple drill out and retap to M10x1.5 The M8 side can be cut to the desired length so can be used on most...

Nord-Lock M8 Steel Lock Washers These new Nord-Lock x-series washers are idea for securing turbochanges, manifold and downpipes We have sometimes found in the past that the heat cycles and vibrations caused by the engine can loosen nuts and bolts on...

Vacuum Actuator Bracket for Garrett GT1749 Series  Fits ALL Garrett Turbochargers found on the VW / Audi / Seat and Skoda 1.9 and 2.0 TDI Engines These Actuators are a direct replacement for the standard actuator bracket on the...

M8x20  Exhaust Studs Special VW Size Exhaust Studs - M8 Thread by 20mm to be used as Downpipe Studs Price is EACH. VW charge ~£1.20 + VAT for these Size:Long Threaded end: 20mm Short Threaded end: 10mm Overall Length: 30mm (See...