Oil Lines and Parts

Garrett 38mm Oil Drain Fitting Darkside 38mm Oil Drain Fitting for Garrett Turbo Charges Fits Garrett Turbos with the 38mm Oil Drain Port Perfect for creating your own oil drain / return line to be used with a 1/2" AN8 Oil Hose (Listed Below) Made in...

Oil Return Line for 1.9 and 2.0 TDI VW Passat & Audi A4 / A6 with GTB Turbo (Cast Manifold) Braided Turbo Oil Return Line for VW Passat & Audi A4 / A6 with GTB Turbo (Cast Manifold) Fits ALL VW Passat / Audi A4 & A6 and Skoda Superb Vehicles with the 1.9...

Oil Return Line for 1.9 and 2.0 TDI Genuine VAG Replacement Oil Return Line for 1.9 and 2.0 TDI Engines This Oil Return Line is designed to be a direct replacement the standard oil return found on the 1.9 and 2.0 TDI VW Group Engines. It will fit with...

Turbo Inlet Pipe for Round / Oval Port CR Engines 200BHP Turbo Upgrade Turbo Inlet Pipe for Round / Oval Port CR Engines fitted with 200BHP Turbocharger Upgrade Replacement / Upgrade Turbo Inlet Pipe for CR TDI Round & Oval Port Engines fitted with...

Turbo Oil Feed Washers for Various VAG Diesel & Petrol Engines Replacement Turbo Oil Feed Washers for Various VAG Diesel & Petrol Engines Replaces Genuine VW Part...

Mk7 Platform Braided Oil Feed Line for 200BHP Turbo Upgrade Braided Oil Feed Line for 2.0 TDI Mk7 Platform with 200BHP Turbo Upgrade Please Note - This Oil Feed is suitable for the Turbo Upgrade ONLY Replaces the standard Hard Line that does not fit our...

AN-10 Custom Turbo Oil Return Line This Oil Return Line will work with most Garrett and KKK / Borg Warner Turbochargers and can be cut to suit Perfect when retro-fitting a turbocharger and no off the shelf Oil Return will fit This is larger than the AN-8...

Darkside Braided Oil Feed Line for 1.6 & 1.9 TD Braided Turbo Oil Feed Pipe / Line for VW Group TD Engines Fits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 1.9 TD Engines Designed to replace the standard hard line found on the 1.6 and 1...

12mm ID Copper Washer for M12 Banjo Bolt 12mm Copper Washer, Suitable for M12 Banjo Bolt This M12 Banjo Bolt is for the engine side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the thread BEFORE...

10mm ID Copper Washer for M10 Banjo Bolt 10mm Copper Washer, Suitable for M10 Banjo Bolt This M10 Banjo Bolt is for the turbo side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the thread BEFORE...

M12 x 1.5 Banjo Bolt - Suitable for Oil Feed (Engine Side) M12 x 1.5 Banjo Bolt Suitable for Oil Feed Lines This M12 Banjo Bolt is for the engine side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check...

Melett Electronic Actuator for VW Crafter 2.5 TDI Brand New Melett Electronic Actuator for VW Crafter 2.5 TDI This is a direct replacement for the Standard Actuator, VW will require you to buy a new...