Turbochargers and Parts

Nord-Lock M8 Steel Lock Washers These new Nord-Lock x-series washers are idea for securing turbochanges, manifold and downpipes We have sometimes found in the past that the heat cycles and vibrations caused by the engine can loosen nuts and bolts on...

GTB1756VK Nozzle Ring Cage Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB1756VK CHRANozzle Ring AssemblySteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible with the...

Vacuum Actuator Bracket for Garrett GT1749 Series  Fits ALL Garrett Turbochargers found on the VW / Audi / Seat and Skoda 1.9 and 2.0 TDI Engines These Actuators are a direct replacement for the standard actuator bracket on the...

M8x20  Exhaust Studs Special VW Size Exhaust Studs - M8 Thread by 20mm to be used as Downpipe Studs Price is EACH. VW charge ~£1.20 + VAT for these Size:Long Threaded end: 20mm Short Threaded end: 10mm Overall Length: 30mm (See...

BRAND NEW Vacuum Actuator for PD100, PD105 & PD130 1.9 8v TDI Engines These Actuators are found on the 1.9 TDI Turbochargers fitted in the Golf Mk4 & MK5, VW Jetta Mk5, Seat Leon, Seat Toledo,Audi A3...

Garrett VZK Oil Return Adapter Plate Kit These fittings are to be used when retro-fitting a Garrett VZK Turbo to a VAG TDi Engine The Flange is CNC Machined from Billet AlloyThis kit includes the following:CNC Machined VZK Oil Return PlateOil Return...

OE VZK Turbocharger Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the VZK turbocharger on the later 2.7 / 3.0 TDI Audi Vehicles This kit is made up of OE / Audi Parts; 1 x Downpipe Gasket1x Oil Return...

Darkside GTB2566VK Billet Compressor Wheel Larger Billet Compressor Wheel to upgrade Garrett GTB2260VK Turbocharger into a GTB2566VK The compressor wheel is our own design to prevent surge and with extended tip technology so it flows well...

Braided Turbo Oil Feed Pipe for 1.6 & 2.0 TDI EnginesFits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 2.0 TDI CR Engines This kit consists of:Darkside Developments Braided Oil Feed LineBanjo Bolts and...

Brand New GTB1756VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB1756VK CHRANozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible with the...

Darkside Oil Drain Fitting Fits Garrett Turbos with the 38mm Oil Drains Fits Garrett Turbos with the 38mm Oil Drainers Perfect for creating your own oil drain / return line to be used with a 0.5" hose Made in the UK  Overall Length -...