Turbochargers and Parts

Darkside GTD2872VRK Billet Hybrid with Electronic Actuator Garrett Turbocharger Fully Rebuilt with the Latest GTD VNT System, Ball Bearings, Custom Billet Compressor Wheel, Upgraded Turbine Wheel and Electronic Actuator PLEASE NOTE - THE ELONGATED FLANGE...

1.9 TDI 8v PD105 BLS / BRM & 2.0 TDI PD140 BMM GTB1749V - 200bhp / 220bhp / 240bhp Turbo Upgrade 1.9 TDI 8v PD105 BLS / BRM & 2.0 TDi PD140 BMM 200bhp, 220bhp OR 240bhp Turbo Upgrade This is a bolt on turbo upgrade that is capable of 170bhp on stock...

GTB2260VK Compressor Housing / Cover Seal Compressor Housing / Cover Seal for GTB2260VK Turbochargers Ideal for turbocharger rebuild We can also supply the following parts for a full turbocharger rebuild: GTB2260VK CHRA with Billet...

Transporter T5 / Touareg 2.5 TDI Cast Exhaust Manifold - AXD / AXE / BLJ / BLK / BAC Replacement Cast Exhaust Manifold for 5 Cylinder VW Transporter T5 and VW Touareg (Manual Transmission) This Cast Iron Manifold is a direct replacement for the standard...

AN-10 Custom Turbo Oil Return Line This Oil Return Line will work with most Garrett and KKK / Borg Warner Turbochargers and can be cut to suit Perfect when retro-fitting a turbocharger and no off the shelf Oil Return will fit This is larger than the AN-8...

Darkside Braided Oil Feed Line for 1.6 & 1.9 TD Braided Turbo Oil Feed Pipe / Line for VW Group TD Engines Fits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 1.9 TD Engines Designed to replace the standard hard line found on the 1.6 and 1...

Darkside GTB Turbo Kit for Audi B8 Platform 2.0 16v CR Engines Darkside Developments Turbo Kit for the 2.0 16v Common Rail TDI Engines found in Audi B8 Platform Vehicles This fits the Audi B8 Platform 2.0 TDi 16v Common Rail Engines with the ROUND & OVAL...

12mm ID Copper Washer for M12 Banjo Bolt 12mm Copper Washer, Suitable for M12 Banjo Bolt This M12 Banjo Bolt is for the engine side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the thread BEFORE...

10mm ID Copper Washer for M10 Banjo Bolt 10mm Copper Washer, Suitable for M10 Banjo Bolt This M10 Banjo Bolt is for the turbo side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the thread BEFORE...

M12 x 1.5 Banjo Bolt - Suitable for Oil Feed (Engine Side) M12 x 1.5 Banjo Bolt Suitable for Oil Feed Lines This M12 Banjo Bolt is for the engine side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check...

M10 x 1.0 Banjo Bolt - Suitable for Oil Feed (Turbo Side) M10 x 1.0 Banjo Bolt Suitable for Oil Feed Lines This M10 Banjo Bolt is for the turbo side of the oil feed on most VAG applicaitons, however, may also be suitable for many others. Please check the...

Garrett GTD2263VZ 3.0 TDI Turbocharger Upgrade Kit Brand NEW Garrett GTD2263VZ Turbocharger Kit This turbo is capable of around 350bhp when tuned. We would rate the stock GTD2060VZ to just over 300bhp Increase in Performance OEM Turbocharger...