Description
MTS Technik Coilovers (Street, Inox) for Seat AROSA (6H)
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Configuration & specifications
| XMTSGWVW126 | XMTSGWVW41 | |
|---|---|---|
| Configuration | ||
| Top mounts | Camber adjustable (front) | Stock (not included) |
| Lowering (mm) | ||
| Front | 25 - 80 mm | 25 - 80 mm |
| Rear | 25 - 60 mm | 25 - 60 mm |
| Axle load (kg) | ||
| Front | -820 kg | -820 kg |
| Rear | -700 kg | -700 kg |
| Spring rates (N/mm) | ||
| Front main spring | — | 60 N/mm |
| Front helper spring | — | 20 N/mm |
| Rear main spring | — | 50 N/mm |
| Approval | ||
| TÜV | no | yes |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list | ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).• Stabiliser bars available seperatly.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
Notes by configuration
XMTSGWVW126 — Camber adjustable (front):
- The kit includes 2 upper front camber plates.
This Kit will fit the following Vehicles:
Seat AROSA (6H) - 1.4 16V / 1.7 SDI / 1.0 / 1.4 TDI / 1.4
Volkswagen LUPO I (6X1/6E1) - 1.4 TDI / 1.0 / 1.2 TDI 3L / 1.4 / 1.4 16V / 1.4 FSI / 1.7 SDI
MTS TECHNIK PART NUMBER:
XMTSGWVW126 — Camber Front
XMTSGWVW41