Description
MTS Technik Coilovers (Stance, Gold) for Audi A4 B5 (8D) / A4 B5 Avant (8D)
RELIABLE AND AFFORDABLE STANCE SUSPENSION FROM MTS TECHNIK Stance: The Stance series suspension is an offer for lovers of significant lowering and stiffer characteristics, a set dedicated to demanding drivers.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Configuration & specifications
| MTSGWAU52-S | MTSGWAU53-S | |
|---|---|---|
| Configuration | ||
| Top mounts | Stock (not included) | Stock (not included) |
| Variant note | without Quattro | without Quattro |
| Lowering (mm) | ||
| Front | 40 - 90 mm | 40 - 100 mm |
| Rear | 45 - 100 mm | 45 - 100 mm |
| Axle load (kg) | ||
| Front | -1080 kg | 1081 - 1150 kg |
| Rear | -1185 kg | -1185 kg |
| Spring rates (N/mm) | ||
| Front main spring | 150 N/mm | 200 N/mm |
| Front helper spring | 20 N/mm | 20 N/mm |
| Rear main spring | 50 N/mm | 50 N/mm |
| Rear helper spring | 20 N/mm | 20 N/mm |
| Approval | ||
| TÜV | yes | yes |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate | ⬇ Installation manual ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing).• Not for 4x4.
• Only for vehicles without electronic damping.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
This Kit will fit the following Vehicles:
Audi A4 B5 (8D) - 2.4 / 1.6 / 2.6 / 1.8 / 2.8 / 1.8 T / 1.9 TDI / 2.5 TDI
Audi A4 B5 Avant (8D) - 2.4 / 1.6 / 2.6 / 1.8 / 2.8 / 1.8 T / 1.9 TDI / 2.5 TDI
MTS TECHNIK PART NUMBER:
MTSGWAU52-S
MTSGWAU53-S