Mini R Series N47N Diesel Engines DPF Delete Downpipe

Darkside Developments 2.5" Stainless DPF Delete Downpipe to fit Mini R Series Vehicles with N47N Engines

This 2.5" Stainless Steel DPF Delete Downpipe is a straight replacement to remove the factory fitted Diesel Particulate Filter

Increased performance and driveability

Made from Aircraft-grade Stainless Steel

High Flow for maximum performance

Designed and made in the UK

Includes new clamp and gasket

This Kit Consists of:

1x Stainless DPF Delete Downpipe
1x Downpipe Clamp
1x Downpipe Gasket

Series / Chassis:

R55N / R56N / R57N / R58 / R59

Models:

Cooper / One

Engines:

N47N

This item will fit the following Vehicles:

R55N N47N Cooper D 1.6 Clubman
R55N N47N Cooper D 2.0 Clubman
R55N N47N Cooper SD Clubman
R55N N47N One D Clubman
R56N N47N Cooper D 1.6 3 doors
R56N N47N Cooper D 2.0 3 doors
R56N N47N Cooper SD 3 doors
R56N N47N One D 3 doors
R57N N47N Cooper D 1.6 Convertible
R57N N47N Cooper D 2.0 Convertible
R57N N47N Cooper SD Convertible
R58 N47N Cooper SD Coupe
R59 N47N Cooper SD Roadster

Replaces Genuine BMW / Mini Part Numbers:

18 30 8 509 056 - 18308509056 - 8 509 056 - 8509056
18 30 8 509 055 - 18308509055 - 8 509 055 - 8509055

When buying the DPF Delete Pipe on its own you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Our DPF Delete Pipes are generally supplied with only a Lambda Sensor Boss and sometimes an EGT boss. On most models the Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and tied up out of the way.

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country.